Telecom Civil Work at Fiber NE POP
Damcon is currently building rooms for optical fiber cable datacenters all over Pakistan. The scope of work is given below:
1. Designing
Detailed site survey and submission of proposal / construction/ as-built drawings of proposed civil works, including structural feasibility report / SSC at roof-top sites.
2. Room Construction
Construction of new brick masonry room as per drawings including excavation, RCC footing, brick-work, plinth beams, plaster at internal & external sides, reinforced flooring above compacted earth, RCC slab along-with roof treatment over slab with proper slope and PVC pipe for water drainage, formwork & shuttering (plywood), RCC with steel G-60.
At Damcon Engineering, we build your dreams into realities.
3. Paint
Internal and external paint of equipment room with 3 coats plastic emulsion. Weathercoat acrylic exterior finish on outer walls.
4. Steel Door
Steel door of size as per drawing with 16 gauge MS sheet including door frame, hinges, heavy duty door closer, builtin steel handle at both sides, gaskit for proper sealing, keylock, filling of surface finish on both sides of door and applying 1 coat of primer red oxide and 2 coats of synthetic enamel paint spray gun, etc.
At Damcon Engineering, we build your dreams into realities.
5. Antistatic Venyl Tiles
Installation of new anti-static vinyl tiles inside equipment room these tiles are conductive, anti-static, PVC based wtih copper strip below them.
6. Galvanized Cable Bridge
Installation of galvanized cable bridge with 1 coat of primer and 2 coats of synthetic emamel paint from tower to room with firmly fixed supports and its foundations.
At Damcon Engineering, we build your dreams into realities.
7. Installation of Air Conditioners
Installation of DC Inverter SPLIT AC’s 24000BTU wall mounted along with airconditioning control arrangement thermostats for temp. control, AC timers and relays.
8. Fire Suppression System
Supply & installation of Fire Suppression System with UL listed control panel, FM-200 cylinder fully automatic with ancillaries as per NFPA standards.
At Damcon Engineering, we build your dreams into realities.
9. Construction Diesel Generator Pad
Construction of Generator and fuel tank pad of 1500x3750mm (RCC) as per drawings.
10. Fuel Tank 500 Liters
Provision & installation of fuel tank (500 L) with all ancillaries and connections.
At Damcon Engineering, we build your dreams into realities.
11. Power DB and ATS Panel
Provision and installation of indoor Power DB with Surge Arrestor along-with all connections as per approved SLD (single line diagram) with all necessary components circuit breakers, ELCB, switches, AC timer / relays, tagging of breakers, Lock / handle, 3 indication lights, voltmeter, Ammeter, Fuse, Neutral & Ground connections etc. SPD Rating at full discharge current 100KA, Protection level 1.5KV, rated discharge current 25KA. ATS Panel will all replays timers and Magnetic Contactors etc.
12. Cable Trays
Provision & installation of cable Tray 300mm wide perforated galvanized inside room along-with 2 vertical drops, at 7.5ft above FFL, including wall hangers.
At Damcon Engineering, we build your dreams into realities.
13. Internal Grounding / Earthing
Complete internal Grounding of equipment room including door, ATS & DB and cable tray etc. along with copper strips 37.5mmx5mm at 1ft above FFL with insulators @ 1m and its connection with main site grounding.
